Product ID:COLORFLAKE M BASECOAT RESIN-COMP B
MSDS Date:03/01/1992
FSC:8030
NIIN:00N040183
Kit Part:Y
MSDS Number: BSQKF

Emergency Phone: 213-636-0561

Info Phone: 213-636-0561

Cage: 88167

Telephone: 908-245-2800

Cage: 88167

MODIFIED POLYAMINE; (MODIFIED POLYAMINE EPOXY HARDNER)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MINOR BURNING TO EYES, NOSE,
THROAT AND SKIN. CHRONIC: DEFATTING TO SKIN-DIZZINESS AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid:INHAL:MOVE TO FRESH AIR. EYES: FLUSH WITH WATER FOR AT LEAST
15 MINUTES-CALL PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INGEST:
DO NOT INDUCE VOMITING-CALL PHYSICIAN.

Flash Point Method:SCC
Flash Point:200F,93C
Extinguishing Media:CARBON DIOXIDE-DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER SPILL AND PLACE
IN CLOSED CONTAINER. REMOVE ALL SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL DRY AREA-PROTECTIVE
GLOVES SHOULD BE WORN AS MATERIAL IS SLIGHTLY CORROSIVE.
Other Precautions:AVOID INHALATION OF HEATED VAPORS AND SPRAY MISTS.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR IF VENTILATION IS
POOR.
Ventilation:USE GOOD LOCAL EXHAUST/MECHANICAL(GENERAL).
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:CHEMICAL GOGGLES.
Other Protective Equipment:AS NEEDED TO PROTECT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Spec Gravity:1.01(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE STRAW LIQUID-MODERATE AMINE ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS. AVOID CONTACT W/EPOXY RESIN IN
UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:AVOID CONTACT W/EPOXY RESINS UNTIL
READY FOR APPLICATION.

Waste Disposal Methods:DIPOSE OF IN SANITARY LANDFILL ACCORDING TO
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.